やさしい義眼のつくりかた How to make artificial eye and prosthesis

顎顔面補綴という仕事を通じて身につけた義眼やエピテーゼの製作技術やその背景をご紹介。 あまり広く認知されていない技術ですが、どこかで誰かの役に立てればいいですね。 フィギュアなどの趣味にも生かせるように、なるべく特殊な材料や 道具を使わない方法も お伝えできればと思います。 How to make artificial eye and prosthesis.

How to make artificial eye and prosthesis.

silicone

After the silicone cured

New video "after silicone cured" showing starting from opening the flask.

It's just open and remove ear prosthesis, then trim excess silicone.

After this external stainning is waiting.....(most sweatty time💦)


Silicone coloring technique

I made another video "How to make the base color of silicone prosthesis".

I guess everybody is having problem with coloring.

I like to make base shade of silicone closer to target as much as possible.

The video shows when I was making base silicone color for finger prosthesis.

The target skin tone was for five years young Filipino girl.

Especially finger prosthesis, I don't want to rely on extrinsic color only.

Knowing the situation how would finger prosthesis been used.

External color is easy to be scratch off.



I made the video this time, not horizontal size.
Which do you prefer?

Back to normal....

I tried another idea of investing way of finger prosthesis.

But....

I got back to normal.

Maybe I'm thinking too much.


IMG_6313

Just opened the mold.
Normal invest way using stone.

The excess silicone came out at the side, is very thin this time.
It's acceptable and easy to remove it with a sharp scalpel.

IMG_6314


Finger prosthesis (removing excess silicone)


After a lot of trial and error and new attempts, I got it a satisfactory level.

The new idea is still secret, but the janction area (excess silicone) is very thin and minimal.

 

The color of the base silicone is close enough to skin tone, and the characterization is done at the silicone filling stage, so the stain can be minimal.

Of course, it won't stand out even if the surface is rubbed and the color of the base comes out.




IMG_6160

Time for final stain....

IMG_6163





指のエピテーゼ

IMG_6104


指のエピテーゼを作るのに新しいアイデアを試して結局、土曜 日曜とみっちり仕事しました。
結果としていつの間にか積み上がった累々たる屍、だんだんソーセージに見えてきた。

目下の課題はどうしてもエピテーゼ側面に残ってしまう合わせ目のバリ。
耳などの場合は削ってならすことができるのですが、指の場合なるべく指紋やシワを潰したくありません。

そして指という性格上、表面のステインに頼りすぎるとすぐに擦れて下地が見えてしまいます。

作った当初は良くてもあとですぐ色が変わるエピテーゼは作りたくないので・・・

色々と試して試して、気がつくとたくさんのソーセージが出来上がりました。

IMG_6102

この写真は途中経過のもの。
ベースの色はまずまず、サイドの合わせ目もありませんが、ただ、色がベース色一色のみ。

せめて爪のところだけでもキャラクタライズしたいところです・・・・

悩みは尽きない・・気がつけばもう日曜の真夜中。


FullSizeRender

根本的なところから見直し、本日もう最後の一本にしようとシリコンを詰めたものがこれ。

型を開けた時点でちょっと手応えを感じました。

この指の本来の持ち主は結構褐色が強く関節部も特に色が濃い。
腹側は赤みが強いし、なかなか特徴の強い指の持ち主。

多分ようやく一つ扉が開いた感じ。
顔面補綴マニュアル  やさしい義眼の作り方 How to make artificial eye
How to make Ear Prosthesis 英語版
エピテーゼのつくりかた 耳
ギャラリー
  • 左手デバイス
  • 旅立つおっぱい
  • 自社開発製品 その2
  • 自社開発製品 その2
  • 指つづき
  • 指つづき
  • 指つづき
  • 義眼のセミナー
  • 義眼のセミナー
著者ページ
著者近影

村井 さむ

著者ページ

日本でのプレッシャーを逃れフィリピンに移住してはや10年、まだ生きてます。やさしい義眼の作り方

材料道具その他もろもろ
記事検索
LINE読者登録QRコード
LINE読者登録QRコード
最新コメント
楽天市場
  • ライブドアブログ